05-09-2022, 02:03 PM
(Seda postitust muudeti viimati: 08-09-2022, 08:04 PM ja muutjaks oli MercedesBenz.)
Tere. Sai mingi aeg ostetud antud isend.
w203 c220 cdi 105kw 2003a
Mootorikood 646.963
Ls 350k
Peale auto ostu sai delphiga diagnostitud:
1664 - Heater booster control module, signal line is interrupted - Permanent
2626 - Particulate filter - Permanent
Kustutasin veakoodid ära, alles jäi:
1664 - Heater booster control module, signal line is interrupted - Permanent
Sai vahetatud roolilatt (romula jupi vastu). Rool jäi viltu umbes 30 kraadise nurga alla. Mõnisada km peale seda viskas ette "Elec. Stabil. Prog. Visit Workshop. ESP".
Sellele nii kiirelt tähelepanu ei pööranud ja sai veel 100-200km sõidetud, kuni tuli maanteesõiduga ette ka "Coolant! Visit Workshop!".
Samuti puudub autol gaas-põhja tallates märgatav kiirendus. Läheb vaikselt ja sujuvalt. Kuna ise selle autoga ei sõida, siis ei tea kas jõuetus tuli peale esimest või teist veakoodi.
Panin delphi uuesti järgi.
Veakoodid:
Mootoriga seoses:
1664 - Heater booster control module, signal line is interrupted - Permanent
2526 - Right charge pressure positioner - Permanent
0100 - Charge air system, air mass is too small - Permanent
2527 - Left EGR positioner, short circuit to ground - Permanent
2529 - Throttle potentiometer; short circuit to ground - Permanent
2530 - Inlet port shutoff motor, short circuit to ground - Permanent
1636 - Engine / A/C suction fan, actuation; short circuit to ground - Permanent
2514 - Vent line heater element, short circuit to ground - Permanent
Pidurid/ESP
C1120 - Left rear speed sensor; line monitioring - Intermittent
C1130 - Right rear speed sensor; line monitioring - Intermittent
C1170 - Zero compensation of steering angle sensor - Intermittent
0100 koodi osas proovisin nt MAF anduri puhastamist vastava vahendiga, ei muutnud miskit. Nüüd sai sillastendis rooli otseks, peale seda proovisin ka koodid kustutada ja Steering Angle Sensori resettida (rool mitu korda mõlemale poole põhja ja lõpuks otseks).
Kõik koodid alles.
On kellelgi sarnast janti olnud? Oskate midagi soovitada?
Tänud.
//////////////////////////////////////////////////////////////
Natuke veel koode, kuid nende üle väga palju pead ei vaeva:
Instrument (Instrument - KI203 - MT/AT - -> 03/08) DTC Description
B110D - CAN; communication fault with control unit AAC pushbutton - Intermittent
B1121 - Navigation to Head Unit Communication Error - Intermittent
Climate (Climate control - KLA203 - MT/AT - -> 03/08) DTC Description
B15A8 - Footwell flap actuator; left and right is blocked/stiff - Intermittent
Multifunction (SAM - Front (Signal Acquisition and Control Module - Front ) - SAMV203 - MT/AT - ->03/08) DTC Description
B1029 - Control module AAC is not transmitting any data.If fault code occurs with no complaint reported and no malfunctions, erase fault memory and perform a function check - Permanent Delphi DS150E (New VCI) | 2014 Release 2 (2.14.2.2) 2
Multifunction (SAM - Rear (Signal Acquisition and Control Module - Rear) - SAMH203 (Signal Acquisition and Control Module - Rear) - MT/AT - ->03/08) DTC Description
B1066 - Left turn signal; short circuit or Open circuit. - Permanent
B1054 - Left stop light; short circuit or open circuit - Permanent
B1067 - Right turn signal; short circuit or Open circuit. - Permanent
B1051 - Right taillamp (outer); short circuit or open circuit - Permanent
B1055 - Right stop light; short circuit or open circuit - Permanent
B1091 - Fault in CAN communication with control unit AAC pushbutton. If fault code occurs with no complaint reported and no malfunctions, erase fault memory and perform a function check. - Permanent B1050 - Left taillamp (outer); short circuit or open circuit - Permanent
Kõik tuled töötavad
Multifunction (Steering column module - MRM (Steering column module) - MT/AT - ->03/08) DTC Description
B1000 - Control unit faulty - Permanent
Multifunction (Upper control panel - OBF203 (Upper control panel) - MT/AT - - >03/08) DTC Description
9024 - Fault in CAN communication with Overhead control panel control module - Permanent
9025 - CAN; communication fault with control unit SRS - Permanent
w203 c220 cdi 105kw 2003a
Mootorikood 646.963
Ls 350k
Peale auto ostu sai delphiga diagnostitud:
1664 - Heater booster control module, signal line is interrupted - Permanent
2626 - Particulate filter - Permanent
Kustutasin veakoodid ära, alles jäi:
1664 - Heater booster control module, signal line is interrupted - Permanent
Sai vahetatud roolilatt (romula jupi vastu). Rool jäi viltu umbes 30 kraadise nurga alla. Mõnisada km peale seda viskas ette "Elec. Stabil. Prog. Visit Workshop. ESP".
Sellele nii kiirelt tähelepanu ei pööranud ja sai veel 100-200km sõidetud, kuni tuli maanteesõiduga ette ka "Coolant! Visit Workshop!".
Samuti puudub autol gaas-põhja tallates märgatav kiirendus. Läheb vaikselt ja sujuvalt. Kuna ise selle autoga ei sõida, siis ei tea kas jõuetus tuli peale esimest või teist veakoodi.
Panin delphi uuesti järgi.
Veakoodid:
Mootoriga seoses:
1664 - Heater booster control module, signal line is interrupted - Permanent
2526 - Right charge pressure positioner - Permanent
0100 - Charge air system, air mass is too small - Permanent
2527 - Left EGR positioner, short circuit to ground - Permanent
2529 - Throttle potentiometer; short circuit to ground - Permanent
2530 - Inlet port shutoff motor, short circuit to ground - Permanent
1636 - Engine / A/C suction fan, actuation; short circuit to ground - Permanent
2514 - Vent line heater element, short circuit to ground - Permanent
Pidurid/ESP
C1120 - Left rear speed sensor; line monitioring - Intermittent
C1130 - Right rear speed sensor; line monitioring - Intermittent
C1170 - Zero compensation of steering angle sensor - Intermittent
0100 koodi osas proovisin nt MAF anduri puhastamist vastava vahendiga, ei muutnud miskit. Nüüd sai sillastendis rooli otseks, peale seda proovisin ka koodid kustutada ja Steering Angle Sensori resettida (rool mitu korda mõlemale poole põhja ja lõpuks otseks).
Kõik koodid alles.
On kellelgi sarnast janti olnud? Oskate midagi soovitada?
Tänud.
//////////////////////////////////////////////////////////////
Natuke veel koode, kuid nende üle väga palju pead ei vaeva:
Instrument (Instrument - KI203 - MT/AT - -> 03/08) DTC Description
B110D - CAN; communication fault with control unit AAC pushbutton - Intermittent
B1121 - Navigation to Head Unit Communication Error - Intermittent
Climate (Climate control - KLA203 - MT/AT - -> 03/08) DTC Description
B15A8 - Footwell flap actuator; left and right is blocked/stiff - Intermittent
Multifunction (SAM - Front (Signal Acquisition and Control Module - Front ) - SAMV203 - MT/AT - ->03/08) DTC Description
B1029 - Control module AAC is not transmitting any data.If fault code occurs with no complaint reported and no malfunctions, erase fault memory and perform a function check - Permanent Delphi DS150E (New VCI) | 2014 Release 2 (2.14.2.2) 2
Multifunction (SAM - Rear (Signal Acquisition and Control Module - Rear) - SAMH203 (Signal Acquisition and Control Module - Rear) - MT/AT - ->03/08) DTC Description
B1066 - Left turn signal; short circuit or Open circuit. - Permanent
B1054 - Left stop light; short circuit or open circuit - Permanent
B1067 - Right turn signal; short circuit or Open circuit. - Permanent
B1051 - Right taillamp (outer); short circuit or open circuit - Permanent
B1055 - Right stop light; short circuit or open circuit - Permanent
B1091 - Fault in CAN communication with control unit AAC pushbutton. If fault code occurs with no complaint reported and no malfunctions, erase fault memory and perform a function check. - Permanent B1050 - Left taillamp (outer); short circuit or open circuit - Permanent
Kõik tuled töötavad
Multifunction (Steering column module - MRM (Steering column module) - MT/AT - ->03/08) DTC Description
B1000 - Control unit faulty - Permanent
Multifunction (Upper control panel - OBF203 (Upper control panel) - MT/AT - - >03/08) DTC Description
9024 - Fault in CAN communication with Overhead control panel control module - Permanent
9025 - CAN; communication fault with control unit SRS - Permanent
