W221 C216 Comand NTG3 navi ei tööta enamus aega

[ak75]

Uusi 2,5" IDE kettaid 20Gb mahuga tundub, et enam leida ei õnnestu. Sestap tuleb kohe CF teed minna. Leidsin selle HDD CF kaardiga asendamise teema üles https://mbworld.org/forums/s-class-w221/...ement.html
Copyn igaks juhuks töö käigu siia:

1. Pull out the unit (I think I have instructions for that somewhere)
2. Take out the harddrive (6 or 8 torx screws and some strange spring mechanism, that is rather non-protective against vibration)
3. Connect your harddrive with 2.5" to 3.5" adaptor to a pc and also connect a 2.5" ide to CF adaptor with a good 32Gb 300x CF card.
4. Launch some small linux distribution from usb flash drive.
5. Execute command: dmesg |grep /dev/sd
6. see both the harddrive and the cf card recognised (one is 20 gig hdd and second should be 32 gig cf - linux will name them approprietly - /dev/sda and /dev/sdb - remember, which is which)
7. Execute command: dd if=/dev/sda of=/dev/sdb (IF YOUR ORIGINAL DRIVE IS /dev/sda and target CF IS /dev/sdb - get this wrong and you have no navigation and air-con controls!!!)
8 After some 20 - 30 minutes you have a good SSD to put in your navigation.
9. It is much easier if you do that before your navigation is toast, because of broken HDD - I know, because right now I am searching for a HDD image to write to a blank hdd to revive this darn thing.
As usual, I bare no responsibility for a toast system, but I know linux well, to know, how this navigation works. It uses QNX4 operating system with most bits programmed in Ukraine... Filesystem is qnx4-fs aswell, so Acronis, Ghost or any other software will not get the hang of it. DD, on the other hand is brilliant, because it makes a 1:1 copy of every bit

Adapter tuleb ilmselt välismaalt tellida, CF kaardi saab siit. Edasi jääb takistuseks tarkvara. Aga eks siis vaatab edasi kui adapter ja kaart olemas.