06-06-2017, 12:42 AM
(Seda postitust muudeti viimati: 06-06-2017, 12:45 AM ja muutjaks oli Renka.)
Tegemist on xentry TIPS keskkonna dokumendiga, millele tavakasutaja ligi ei pääse.
Info sama, millele ise eelnevalt viitasid
M156 up to engine # 060658
Complaint:
High coolant loss, coolant level lamp lights up
No external coolant loss detectable. Coolant in the engine oil and/or in the combustion chamber
Cause:
Cylinder head bolt broken
Remedy:
1. Remove cylinder heads
2. Measure piston undercut (specified value: 0.05 mm +/- 0.18 mm). If the piston undercut is less than the maximum
(0.23 mm), the affected connecting rod with piston must be replaced.
3. Replace all cylinder head bolts
4. Replace all hydraulic tappets
5. Perform oil change including filter
6. Another oil change must be performed after a test drive (engine must be warm)
Info sama, millele ise eelnevalt viitasid
M156 up to engine # 060658
Complaint:
High coolant loss, coolant level lamp lights up
No external coolant loss detectable. Coolant in the engine oil and/or in the combustion chamber
Cause:
Cylinder head bolt broken
Remedy:
1. Remove cylinder heads
2. Measure piston undercut (specified value: 0.05 mm +/- 0.18 mm). If the piston undercut is less than the maximum
(0.23 mm), the affected connecting rod with piston must be replaced.
3. Replace all cylinder head bolts
4. Replace all hydraulic tappets
5. Perform oil change including filter
6. Another oil change must be performed after a test drive (engine must be warm)